BS 60-2 / BS 70-2 Labels
wc_si000475gb.fm 17
2.2 Label Meanings
Ref. Label Meaning
A
To start the machine:
1. Move the throttle to the IDLE position.
2. Push the purge bulb 10 times.
3. Close the choke.
4. Pull the starter rope until engine starts.
5. Move the throttle to the FAST position.
To stop the machine:
1. Move the throttle past the SLOW position.
Warning! To reduce the risk of hearing loss, always
wear hearing protection when operating this
machine.
Read the Operator’s Manual.
Danger!
Asphyxiation hazard.
Engines emit carbon monoxide.
Do not run the machine indoors or in an
enclosed area unless adequate ventilation,
through such items as exhaust fans or hoses, is
provided.
No sparks, flames, or burning objects near the
machine.
Stop the engine before refueling.
This label is molded into the cover. If the label
becomes illegible, the cover must be replaced.
Refer to the Parts Book for ordering information.
To Next Page
Loading...
Need help?
General
