Wacker Neuson CT 48

CT 36 / CT 48 Technical Data
wc_td000141gb.fm 53
5.4 Sound and Vibration Data
The required sound specification, Paragraph 1.7.4.f of 89/392/EEC
Machinery Directive, is:
• the sound pressure level at operator’s location (L
pA
) : "A" dB(A)
• the guaranteed sound power level (L
WA
) = "B" dB(A)
These sound values were determined according to ISO 3744 for the sound
power level (L
WA
) and ISO 6081 for the sound pressure level (L
pA
) at the
operator’s location.
ISO 5349 Part 1 Annex F states, “The vibration characteristics of a vibrating
tool can be highly variable. It is therefore important that the range of
vibration conditions associated with different workpieces, materials,
working conditions, methods of use of the tool, and exposure duration
patterns be reported.”
• The average hand and arm vibration value obtained for the entire
operating rpm range is "C" m/s2.
• The maximum hand and arm vibration value obtained within the entire
operating rpm range is “D” m/s2.
• The minimum hand and arm vibration value obtained within the entire
operating rpm range is “E” m/s2.
Products are tested for hand/arm vibration (HAV) level in accordance with
ISO 5349 Part 1 and ISO 8662 Part 1.
The sound and vibration specifications were obtained on wetted and cured
concrete using the most commonly sold machine configurations. Vibration
values will vary depending on throttle position, operating conditions, and
handle option.
Model Item No.
ABCDE
CT 36-5A
9438
0620106
103 89 4.8 7.3 3.7
CT 36-6
9443 103 89 6.3 8.4 4.7
CT 36-8A
9439 109 95 5.9 7.9 4.8
CT 36-8A-V
9442 109 95 3.4 4.1 2.6
CT 36-9
9444 109 95 3.9 6.9 2.9
CT 36-9-V
9447 109 95 3.5 2.9 5.1
CT 48-8A 9449 109 95 3.9 5.2 3.2
CT 48-9 9453 109 95 5.4 8.1 3.0
CT 48-11A 9450 113 96 8.4 9.1 6.9
CT 48-13A-V 9452 115 98 5.7 9.0 3.8