Wacker Neuson DPU 3050H User Manual

8 Use and operation
33
8.2.2 Starting the engine with electronic starter
1. Set throttle lever to position 1.
2. Insert the key into the ignition lock.
3. Turn key to position II and release when the engine has started.
Note: Abort the start attempt after no more than 15 seconds.
Note: Do not turn the key to position 0 or remove the key while the engine is
running, as this will stop the battery charging.
Item Designation
1 Ignition lock

Wacker Neuson DPU 3050H Specifications

General

Brand	Wacker Neuson
Model	DPU 3050H
Category	Power Tool
Language	English