Need help?Do you have a question about the Wacker Neuson DPU 3050H and is the answer not in the manual?
General| Model | DPU 3050H |
|---|---|
| Category | Power Tool |
| Engine Type | Honda GX160 |
| Fuel Type | Gasoline |
| Working Width | 20 in |
| Max. Compaction Depth | 12 in |
| Frequency | 90 Hz |
| Type | Reversible Plate Compactor |
| Centrifugal Force (lbf) | 6, 744 lbf |
| Base Plate Size (w x l) | 600 x 450 mm |
Specifies operator requirements, training, and personnel safety responsibilities.
Covers work environment, machine stability, operator position, and hazards from moving parts.
Addresses safety for vibratory plates, combustion engines, and refueling practices.
Safety precautions for hydraulic oil and procedures before performing maintenance tasks.
Essential checks before engine start, covering fuel, oil, air cleaner, and leaks.
Guides for starting the engine using recoil or electronic starter systems.
Instructions for operating the machine in forward/reverse and for compacting on inclined surfaces.
Outlines initial, daily, and periodic maintenance tasks required for machine upkeep.
A guide to diagnosing and resolving typical machine malfunctions and their potential causes.
To Next Page