Wacker Neuson DS 70

Rammer Repair Tools
wc_tx001544gb.fm 17
2Tools
2.1 Recommended Special Tools
See Graphic: wc_gr001305rm
2.2 Recommended Repair Tools
Hex key or socket: 4 mm, 5 mm, 6 mm, 8 mm
Ratchet wrench
Extension
Sockets: 10 mm, 13 mm, 17 mm, 19 mm (3/4”), 24 mm,
27 mm (1-1/16”), 32 mm, 38 mm (1-1/2”)
Open-end wrench: 13 mm
Screwdriver
Needle-nose pliers
Large-diameter retaining-ring pliers
Rubber mallet
Punch
Bearing puller
Slide hammer
Drift pin
Impact wrench
Torque wrench (up to 210 Nm [155 ft.lbs.])
Loctite 243
Shell Alvania RL 2 (No. 2) grease
P/N 0081423 Spring box tool
P/N 0117972 Clutch puller
P/N 0153566 Clutch puller (DS 70 only)
P/N 0116816 Impact bushing puller
0081423
0117972
0116816
wc_gr001305rm
0153566