Wacker Neuson Dumper 5001 - Hydraulic system

1-10 BA 5001-6001 US – Edition 1.2 * * 6001b110.fm
Introduction
Description
Noise levels produced by the machine.
L
WA
= sound power level
Other information – see chapter 6.12 Noise levels on page 6-7
Location (5001)
On the engine cover
Description
This label indicates the maximum authorized angle of inclination for driving on slopes,
whatever the position of the machine.
Location (6001 Front Tip)
On the rear chassis
Description
This label indicates the maximum authorized angle of inclination for driving on slopes,
whatever the position of the machine.
Location (6001Powerswivel)
On the rear chassis
Description
This label indicates the maximum authorized angle of inclination for driving on slopes,
whatever the position of the machine.
Location (5001)
On the rear chassis
Description
Indicates that persons other than the operator must keep a safe distance from the machine
during operation!
Location
On the left and right of the chassis
Description
Diesel fuel indication
Location
On the fuel filler inlet
Fig. 11: Noise level
Fig. 12: Safe drive operation
Fig. 13: Safe drive operation
Fig. 14: Safe drive operation
Fig. 15: Crushing hazard
Fig. 16: Fuel requirement