BA D24 en/us* 1.0 * D24_1_0_400.fm 4-15
Putting into operation 4
Responsibility for vehicle equipped with protective structures
The decision regarding the necessary protective structures (type and
category I or II) must be made by the company/person operating the
machine and depends on the specific work situation.
The vehicle operator must observe the national regulations and must
inform the operator on the protective structure to be used in a specific
work situation.
Cabin FOPS category II
The cabin complies with the FOPS category level II requirements
according to EN ISO 3449:2008
► The machine owner must ensure that the hazard situation is evaluated
and that the national regulations are observed.
► The machine owner must ensure that only work is performed that does
not require any higher protection.
► Accidents cannot be fully avoided despite equipping a vehicle with
protective structures.
To Next Page
Loading...
Need help?
General
