BA D24 en/us* 1.0 * D24_1_0_510.fm 5-21
Operation 5
5.10 Attachments
Not available.
5.11 Work operation
Danger zone
• The danger zone is the area in which persons are in danger due to the
movements of the machine or load.
• The danger zone also includes the area that is affected by falling
material, equipment or by debris that is thrown out.
• The danger zone on a slope is different from the one on a level surface
(secure the load). Stop vehicle operation immediately as soon as
someone enters the danger area – see chapter “ Vehicle travel on
slopes” on page 5-8.
• Seal off the danger zone should it not be possible to keep a sufficient
safety distance.
• Extend the danger zone sufficiently in the immediate vicinity of
buildings, scaffolds or other elements of construction.
F
ig
.
1
3
3
Danger zone of front skip
Danger zone of swivel skip
Symbol Description
----- Danger zone
Safety distance of 1.5 m (59 in)
Safety distance of 2.5 m (98 in)
To Next Page
Loading...