4-32 BA D24 en/us* 1.0 * D24_1_0_400.fm
4 Putting into operation
Status indicators
Symbol
Starter/engine start
starting key in position 1
Engine operating mode
Coolant temperature
If the coolant temperature is too high the symbol shown on the left appears and
the buzzer sounds.
• Let the engine run at high idling speed without any load.
• Wait until the temperature drops and the indicator light goes out.
• Stop the engine.
• Check the coolant level.
Fuel tank capacity
Refuel if the symbol shown on the left appears.
Time
Operating hours
Maintenance meter
Counts the remaining engine operating hours down to the next maintenance
work due.
To Next Page
Loading...
Need help?
General
