4-30 BA D18 us* 1.1 * D18i400.fm
4 Putting into operation
Requirements and information for the operating personnel
Read, understand and follow this Operator’s Manual and all other
Operator’s Manuals supplied with the machine.
The machine may only be put into operation by authorized personnel that
has been instructed – see chapter “2.7 Staff Qualifications and Basic
Responsibilities” on page 2-9.
The operator must know and bear in mind the requirements and risks at
the work place.
Perform daily maintenance according to the lubrication and maintenance
plan – see chapter “7.2 Maintenance overview” on page 7-2.
Face the machine as you enter and exit it, and only use the mandatory
climbing aids for entering and exiting.
Keep the footholds and the handholds clean to ensure a safe hold at all
times. Immediately remove dirt, oil, snow, etc.
Always use the mandatory climbing aids when entering and exiting the
machine.
Do not get on a moving machine, or jump off it.
Do not operate the machine if the standard protective equipment (for
example the cabin) has been removed.
Watch the material as you tilt out the skip. Material stuck in the skip can
cause a tipping hazard. Remove stuck or frozen material from the skip
with a suitable tool.
No parts of the body or clothes may protrude outside the machine during
operation.
To Next Page
Loading...
Need help?
General
