BA D18 us* 1.1 * D18i400.fm 4-31
Putting into operation 4
Check lists
The checklists below assist you in checking and monitoring the machine
before, during and after operation.
Wacker Neuson does not claim those lists to be exhaustive.
If the answer to one of the following questions is No, first rectify the cause
of the error (or have it rectified) before starting or continuing work.
The checking and monitoring work listed below is described in greater
detail in the following chapters.
Start-up checklist
Check and observe the following points before putting the machine into
operation or starting the engine:
No. Question Page
1
Enough fuel in the tank? 7-20
2
Correct engine oil level? 7-26
3
Coolant level OK? 7-28
4
Hydraulic oil level correct? 7-33
5
Correct brake fluid level? 7-39
6
Glass cleaner in washer reservoir OK? 7-39
7
Lubrication points greased? 7-9
8
Tires checked for cracks, cuts, etc. ? 7-40
9
Light system, signaling, warning and indicator lights
operational?
--
10
Windows, mirrors, lights, steps, all pedals and control
levers clean and correctly adjusted?
--
11
All control levers and pedals in neutral position? 5-11
12
Maintenance flaps on left und right locked?
Filler cap locked?
7-13
13
Especially after cleaning, maintenance or repair work:
Rags, tools and other loose objects removed?
--
14
Seating position adjusted correctly? 4-4
15
Seat belt fastened? 4-6
16
Before putting the machine into operation, ensure that
nobody is in the danger zone.
5-24
To Next Page
Loading...
Need help?
General
