Wacker Neuson E13-01 User Manual

5-36 BA EZ17 en* 1.1 * ez17b510.fm
5 Operation
Setting down an attachment
1. Screw in the attachment and position it at 5 – 10 cm (2 – 4 in) above
the ground.
2. Shut off the engine and store the ignition switch key safely.
3. Turn the socket wrench D counter-clockwise until the bolts E are
completely retracted.
➥ The quick coupler system is unlocked.
4. Remove the socket wrench.
5. Start the engine.
6. Lower the attachment to level and firm ground ensuring stability.
7. Retract the bucket cylinder and quick coupler system A from the
attachment bolt B.
Fig. 128
Fig. 129
E
D
Fig. 130
B
A

Wacker Neuson E13-01 Specifications

General

Brand	Wacker Neuson
Model	E13-01
Category	Excavators
Language	English