BA EZ17 en* 1.1 * ez17w700.fm 7-11
Maintenance 7
Control lever base
Crushing hazard in the area of the moving parts of the control lever
base.
There is a risk of injury in the area of the moving parts.
► Stay clear (extremities, clothing) of the moving parts.
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Raise the control lever base.
3. Spray the guide lever A and springs B with semi-fluid grease.
4. Raise and lower the control lever base several times.
Keep the lubrication points clean and remove any escaping grease.
To Next Page
Loading...
