Wacker Neuson E13-01 - Page 207

BA EZ17 en* 1.1 * ez17w710.fm 7-41
Maintenance 7
2. Remove lever C.
3. Remove screws D.
4. Remove the cover.
5. Open filler plug E slowly.
6. Add hydraulic oil up to the corresponding mark.
7. Check the hydraulic oil level on sight glass A.
8. Add if necessary and check again.
9. Screw in filler plug E tightly.
Environment
Use a suitable container to collect fluids and lubricants as they flow out
and dispose of them in an environmentally friendly manner.
Fig. 229
DD
C
Fig. 230
E