BA EZ17 en* 1.1 * Safety_01_0.fm 2-7
Safety 2
Machine travel on public roads/sites
• The specific national driving license is required.
• Observe the national regulations (for example the road traffic regula-
tions) during machine travel on public roads/sites.
• Ensure that the machine is in compliance with the national regulations.
• In order not to blind other motorists, using the existing work lights
during machine travel on public roads/site is prohibited.
• When crossing for example underpasses, bridges, tunnels, ensure that
the clearance height and width is sufficient.
• The attachment fitted onto the machine must be certified for travel on
public roads/sites (see for example the registration documents).
• The attachment fitted onto the machine must be empty and in transport
position.
• The attachment fitted onto the machine must be equipped with the
mandatory lights and protective equipment.
• Take measures against unintentional operation of the operating
hydraulics.
• If the machine has different steering modes, ensure that the mandatory
steering mode is selected.
Stopping the engine of the machine
• Stop the engine only according to the Operator’s Manual.
• Before stopping the engine, lower the work equipment/attachment to
the ground.
Stopping and securing the machine
• Unbuckle the seat belt only after stopping the engine.
• Before leaving the machine, secure it to prevent it from rolling away
(for example with the parking brake, suitable wheel chocks).
• Remove the starting key and secure the machine against unauthorized
operation.
To Next Page
Loading...
Need help?
General
