BA EZ17 en* 1.1 * ez17t900.fm 9-21
Technical data 9
Safety instructions load diagrams
The values of the stability table (load diagram) apply to lifting gear
applications.
Crushing hazard due to tipping over of machine!
The machine causes serious injury or death when it tips over.
► Do not exceed the weights indicated in the load diagrams.
► Subtract the weight of the attachment from the weight specified in the
relevant load diagram.
► Use the machine for lifting gear applications only if the mandatory
lifting gear and safety equipment is installed, functional and enabled.
► Telescopic travel gear extended.
If the weight is exceeded, there is a risk of damage to property if the
machine tips over.
► Do not exceed the weights indicated in the load diagrams.
The indications are only approximate values. Attachments, uneven
ground and soft or bad ground conditions affect stability and therefore the
weight to be manipulated. The operator must take these influences into
account.
To Next Page
Loading...
Need help?
General
