BA EZ17 en* 1.1 * ez17i400.fm 4-9
Putting into operation 4
Adjusting the mirrors
• Ensure sufficient visibility from the operator seat onto the job site.
• Ensure maximum visibility to the rear.
• Ensure visibility of the rear left edge of the machine in the mirror on the
left.
• Ensure visibility of the rear right edge of the machine in the mirror on
the right.
Wacker Neuson recommends adjusting the mirrors with two persons.
Do not make any modifications that impair visibility. Otherwise the
machine does not meet the requirements for conformity and registration.
To Next Page
Loading...
