BA E16 en* 1.0 * E16_10_400.fm 4-39
Putting into operation 4
Starting and stopping the engine
Fold up the joystick base after shutting off G the engine.
All hydraulic functions are locked if the control lever is raised with a
running engine.
Functional check of the joystick base
Before starting work, perform a functional check of the control lever base.
1. Start the vehicle.
2. Fold the control lever base G down.
3. Perform vehicle travel on open terrain.
4. Secure the danger zone.
5. Stop the vehicle.
6. Raise the control lever base G.
7. Move all control levers and pedals in all directions.
➥ The selected elements do not move:
➥ Work may be performed with the vehicle.
➥ The selected elements move:
➥ Stop operation immediately.
Contact a Wacker Neuson service center and have the malfunction
rectified.
Joystick base tier
III
Effect
Raised The engine can be started.
Lowered The engine cannot be started.
Joystick base tier
IV
Indication Effect
Raised The engine can be started
Lowered The engine cannot be started