Wacker Neuson E16-02 User Manual

BA E16 en* 1.0 * E16_10_500.fm 5-5
Operation 5
Automatic engine speed setting
If the hydraulic system is not operated for a few seconds, the diesel
engine goes into idling speed
If the hydraulic system is operated, the diesel engine runs at the engine
speed set with the manual throttle.
Tier III
The switch is located on the switch panel on the right.
Tier IV
The automatic engine speed setting can be switched on and off with touch
button F3 on the jog dial.
Changing rpm manually
Tier IV
Push button B on the left control lever makes it possible to toggle
manually at any time between idling speed and the engine speed set with
the manual throttle.
The selected symbol flashes while the engine is in idling speed.
Fig. 128
A
Automatic engine speed
setting
Function
ON Press switch A down
OFF Press switch A upward
Automatic engine speed
setting
Push but-
ton
Indication
On
Off --
Fig. 129
B

Wacker Neuson E16-02 Specifications

General

Brand	Wacker Neuson
Model	E16-02
Category	Excavators
Language	English