5-72 BA E16 en* 1.0 * E16_10_510.fm
5 Operation
Tilt the upper carriage with VDS (Option)
VDS can be used to tilt the upper carriage by up to 15° so that vertical
excavation can be carried out on uneven ground conditions.
Injury hazard due to movements of the upper carriage!
Can cause serious injury or death.
► Do not allow anyone to stay in the danger zone.
► Only tilt upper carriage on the uphill side of the vehicle.
► Only tilt the upper carriage on firm ground.
► Tilt the upper carriage only if the vehicle is at a standstill and if the
attachment is empty.
► Carry out quiet and slow movements with the vehicle, the arm system
and the attachments.
► Do not perform machine travel on slopes with a lateral angle of
inclination over 10°.
► Do not perform vehicle travel on inclines or slopes steeper than 15°.
► Ensure that no parts of the body protrude outside the vehicle.
► Do not board or leave the vehicle if the upper carriage is inclined.
Tipping hazard of machine. Damage to the vehicle due to open doors and
covers or collisions with walls or parts of buildings.
► Carry out quiet and slow movements with the vehicle, the arm system
and the attachments.
► All doors and covers must be closed when tilting the machine.
► Only tilt the upper carriage on firm ground.
► Tilt the upper carriage only if the vehicle is at a standstill and if the
attachment is empty.
► Do not perform machine travel on slopes with a lateral angle of
inclination over 10°.
► Do not perform vehicle travel on inclines or slopes steeper than 15°.
► Only tilt upper carriage on the uphill side of the vehicle.
► Avoid collisions with walls or building parts.
To Next Page
Loading...
Need help?
General
