7-6 BA E16 en* 1.0 * E16_10_700.fm
7 Maintenance
Other maintenance intervals (Wacker Neuson service center):
• Every 500 operating hours or annually
• Every 1000 operating hours
• Every 1500 operating hours
• Every 2000 hours of operation or every two years
• Every 3000 operating hours or every 3 years
For additional details contact a Wacker Neuson service center.
Maintenance with the note authorized service center must be performed
only by the trained and qualified personnel of an authorized service
center.
Only once after the first 50 operating hours (Wacker Neuson service center)
Replace the hydraulic oil filter --
Change the engine oil --
Replacing the engine oil filter --
Replace the gearbox oil (traveling drive) --
Check V-belt condition and tension --
Check the threaded fittings for tightness --
Check labels and Operator’s Manual for completeness and condition --
Check the pressure of the primary pressure limiting valves (operating hydraulics) --
All steps for maintenance once a day and once a week --
To Next Page
Loading...
