Wacker Neuson E16-02 User Manual

BA E16 en* 1.0 * E16_10_700.fm 7-7
Maintenance 7
Maintenance schedule of Lehnhoff mechanical quickhitch system
Other maintenance intervals (Wacker Neuson service center):
• Every 250 operating hours or semi-annually (MS03)
• Every 500 operating hours or annually (MS03)
For additional details contact a Wacker Neuson service center.
L
L
L
M
M
G
H H
Y
L
L
N
N
K
K
Fig. 262 (symbolic representation)
Quickhitch maintenance MS03/MS08/MS10 (operator) Interval
1
Perform visual inspection of the quickhitch system --
10 hours of operation/
daily
Clean bolt guide G
50 hours of operation/
weekly
Clean the bolt contact surface H
50 hours of operation/
weekly
Clean bottom side of the quick coupler system Y
50 hours of operation/
weekly
Clean contact surfaces of the attachment K
50 hours of operation/
weekly
Clean the opening for the socket wrench and bores of the attachment support L
50 hours of operation/
weekly
Clean bolt attachment support M
50 hours of operation/
weekly
Clean centering pins (only MS10) N
50 hours of operation/
weekly
1. For time specifications: the first achieved time specification is decisive. If the situation requires it, perform maintenance if necessary, even if the maintenance
interval has not yet been reached.

Wacker Neuson E16-02 Specifications

General

Brand	Wacker Neuson
Model	E16-02
Category	Excavators
Language	English