7-16 BA E16 en* 1.0 * E16_10_700.fm
7 Maintenance
Control lever base
Crushing hazard in the area of the moving parts of the control lever
base!
Injury hazard due to crushing of parts of body.
► Stay clear (extremities, clothing) of the moving parts.
1. Raise the control lever base.
2. Spray fluid grease onto the guide lever in the area of C.
3. Spray fluid grease on both sides D of the double spring.
Powertilt with Easy Lock – operation in water
• Apply grease to the lubrication points before using in water.
• After using in water, apply grease to the lubrication points to remove all
water.
To Next Page
Loading...
Need help?
General
