7-26 BA E16 en* 1.0 * E16_10_700.fm
7 Maintenance
Engine compartment
1. Park the vehicle in a wash bay or place suitable for washing.
2. Stop the engine – see chapter “ Preparing lubrication” on page 7-9.
3. Clean the vehicle.
Seat belt
Always keep the seat belt clean, as coarse dirt can impair the proper
functioning of the seat belt buckle.
Clean the seat belt (while it remains fitted in the vehicle) with a mild soap
solution only. Do not use chemical agents as they can destroy the fabric.
Cleaning in a saline environment
1. Park the vehicle in a wash bay or place.
2. – see chapter “ Preparing lubrication” on page 7-9.
3. Check the vehicle for salt deposits or corrosion. Have corrosion
removed by a Wacker Neuson service center.
4. Clean the vehicle with a high-pressure cleaner. Clean the vehicle
ensuring that there are no salt deposits in places that are difficult to
access.
Bear in mind the information on cleaning and maintenance.
5. Lubricate the vehicle according to the lubrication plan.
6. Allow the vehicle to dry and check it again for salt deposits.
Loose threaded fittings and attachments
Contact a Wacker Neuson service center.
To Next Page
Loading...
Need help?
General
