BA E16 en* 1.0 * E16_10_900.fm 9-21
Technical data 9
All table values are specified in kg (lbs), in horizontal position on firm and
level ground without bucket or attachment (for example a hammer).
The vehicle’s lift capacity is restricted by the settings of the pressure
limiting valves, the hydraulic output and the hydraulic system’s stabilizing
features.
Neither 75% of the static tilt load nor 87% of the hydraulic lift capacity is
exceeded.
Calculation basis according to ISO 10567
Setting pressure on boom cylinder:
ET35: 24,000 kPA (3481 psi)
EZ36: 24,000 kPA (3481 psi)
The lift capacity applies to vehicles under the following conditions:
• Lubricants and engine/vehicle fluids at the mandatory levels
• Full fuel tank
• Machine at operating temperature
• Operator weight 75 kg (165 lbs)
To Next Page
Loading...
Need help?
General
