9-34 BA E16 en* 1.0 * E16_10_900.fm
9 Technical data
Safety instructions load diagrams
Observe the values of the load diagrams in lifting gear applications.
Crushing hazard due to tipping over of vehicle!
The vehicle causes serious injury or death when it tips over.
► Do not exceed the weights indicated in the load diagrams.
► Subtract the weight of the attachment from the weight specified in the
relevant load diagram.
► Use the vehicle for lifting gear applications only if the mandatory lifting
gear and safety equipment is installed, functional and enabled.
If the weight is exceeded, there is a risk of damage to property if the
vehicle tips over.
► Do not exceed the weights indicated in the load diagrams.
The indications are only approximate values. Attachments, uneven
ground and soft or bad ground conditions affect the vehicle’s stability, and
thus the weight and mass it can handle. The operator must take these
influences into account.
To Next Page
Loading...
