wc_si001039gb_FM10.fm
23
LTV Labels
A See Operator’s Manual for light fixture information and troubleshooting.
BEFORE STARTING THE ENGINE:
1. Check levels of:
■ Engine oil
■ Fuel
■ Coolant
2. Move the circuit breakers to the OFF position.
TO START THE ENGINE:
1. On the engine control panel, turn the key switch to the PREHEAT position; the indicator light will
illuminate during preheating.
2. When the PREHEAT indicator light goes out, turn the key switch to the START position for a
maximum of 15 seconds.
3. When the engine is running, move the circuit breakers to the ON position.
TO SHUT DOWN THE MACHINE:
1. Move the circuit breakers to the OFF position.
2. Turn the key switch to the OFF position to stop the engine.
B NOTICE
Lifting point
C Insert jack locking pin before extending jack.
D,E Fork lift pocket
Tie-down point
F WARNING
Avoid crushing area.
To Next Page
Loading...
