RD 27 Operation
wc_tx000814gb.fm 31
4.7 Using the Seat Belt
Precaution
Always use the seat belt when operating the machine.
To use
To use the seat belt:
1. Pull seat belt (c) out of the retractor in a continuous motion.
2. Fasten seat belt catch (b) into buckle (a).
3. Position the seat belt low across the lap of the operator. The retractor will adjust
the belt length and the retractor will lock in place.
4. Push the release button (d) on the buckle in order to release the seat belt. The
seat belt will automatically retract into the retractor.
wc
r002238
a
b
c
d
To Next Page
Loading...
Need help?
General
