RD 27 Operation
wc_tx000814gb.fm 33
4.9 Adjusting the Steering Column
Background
Adjust the angle of the steering column according to working conditions and the
operator’s height and personal preference.
To adjust
The angle of the steering column can be adjusted as follows:
1. Loosen the four mounting bolts (a) at the base of the steering column.
2. Pivot the steering column forward or backward as desired.
3. Once the desired angle has been reached, re-tighten the mounting bolts.
4.10 Positioning the Scraper Bars
Prerequisites
Machine shut down
Parking brake engaged
Positions
Each drum has two scrapers (a, b). They may be set in the travel position (1) or the
scraping position (2).
To Next Page
Loading...
Need help?
General
