Wacker Neuson RT82-SC3 User Manual

wc_tx003818gb_FM10.fm
77
RT / RTx Engine Control Module (ECM) Diagnostics
Continued from the previous page.
If the wire (c) to the starter solenoid is disconnected or the starter solenoid is faulty,
the following results occur.
■ The control panel indicators will flash immediately after the starter pushbutton is
pressed.
■ The red LEDs of the light ring will illuminate solid red.
■ The engine will not crank.
Reconnect the wire or replace the starter solenoid to enable the machine to start.
wc_gr012439
c

Wacker Neuson RT82-SC3 Specifications

General

Brand	Wacker Neuson
Model	RT82-SC3
Category	Construction Equipment
Language	English