Wacker Neuson RT82-SC3 User Manual

wc_tx003863gb_FM10.fm
52
Operation RT / RTx
4.11 Operating Status Indicator Codes
wc_gr010837
RT
RT
n
f
Ref.
Color and
appearance
Status Transmitter function Cause Remedy
f None Off Off
■ No power:
transmitter is
OFF.
■ No power:
battery is
discharged.
■ Turn transmitter
ON.
■ Check battery.
Green
(blinking
slowly)
On (normal) Normal operation — —
Green
(steady)
Setup mode Awaiting joystick
calibration.
■ See topic
Calibrating the
Joysticks.
See topic Calibrating
the Joysticks.
Green
(blinking
rapidly)
Calibration
mode
Transmitter is in
calibration mode, and
the calibration
procedure can be
performed.
■ See Calibrating
the Joysticks.
See Calibrating the
Joysticks.
Red to green
to yellow
(cycling)
Most recent
joystick
calibration
had an error.
Machine operation may
still be possible
depending on amount
of usable data
available.
■ Joystick(s)
incorrectly
calibrated.
Middle position of
joystick(s) is not
being detected.
■ Recalibrate
joysticks.
Red and
green
(alternating)
Under-
voltage fault
Weak signal
communication.
■ Battery charge is
low.
■ Recharge or
replace battery.
Red
(flashing
every
second)
Under-
voltage fault
Transmission has
stopped. Transmitter
unable to control the
machine.
■ Discharged
battery.
■ Recharge or
replace battery.
Red
(blinking
rapidly)
Joystick
calibration is
required
Transmitter unable to
control the machine.
■ Joysticks not
calibrated
■ Calibrate joysticks.
■ If calibration does
not solve the
problem, contact
Wacker Neuson
Product Support.

Wacker Neuson RT82-SC3 Specifications

General

Brand	Wacker Neuson
Model	RT82-SC3
Category	Construction Equipment
Language	English