To Next Page
Q
qharveyAug 7, 2025
Why Wacker Neuson VP1550 Power Tool motor will not start?
- RRobin WatsonAug 7, 2025
Several factors can prevent the Wacker Neuson Power Tool motor from starting: * The engine switch might be in the OFF position. Ensure it is in the ON position. * The throttle lever could be in the stop or idling position. Move it to the start position. * There might not be enough fuel. Refuel and check the fuel supply and filter. * The tapped clearance could be wrong. Check the tapped clearance, adjust if necessary. * The valves could be worn. In this case, have the machine repaired.
General
