EasyManua.ls Logo

Wacker Neuson VP1340 - User Manual

Wacker Neuson VP1340
48 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operator's manual
Vibratory plate
WP, VP
Model WP, VP
Document 5100032411
Issue 05.2019
Version 06
Language en

Table of Contents

Questions and Answers

  • J
    John BrownAug 7, 2025
    Why Wacker Neuson Power Tool motor will not start?
    • W
      Wendy HartAug 7, 2025
      Several factors can prevent the Wacker Neuson Power Tool motor from starting: * The engine switch might be in the OFF position. Ensure it is in the ON position. * The throttle lever could be in the stop or idling position. Move it to the start position. * There might not be enough fuel. Refuel and check the fuel supply and filter. * The tapped clearance could be wrong. Check the tapped clearance, adjust if necessary. * The valves could be worn. In this case, have the machine repaired.
  • N
    Natalie JonesAug 22, 2025
    What to do if Wacker Neuson VP1340 Power Tool has no vibration with running engine?
    • H
      hopkinskimAug 22, 2025
      If your Wacker Neuson Power Tool exhibits no vibration despite the engine running, it could be due to a worn V-belt, in which case you should replace the V-belt. Alternatively, worn clutch lining can also cause this issue, requiring replacement of the clutch lining.

Summary

1 CALIFORNIA Proposition 65 Warning

3 Introduction

13 Technical data

13.1 WP1540

Detailed technical specifications for the WP1540 model vibratory plate.

13.2 WP1550

Detailed technical specifications for the WP1550 model vibratory plate.

13.3 Combustion engine

14 Technical data

14.1 VP1135

Detailed technical specifications for the VP1135 model vibratory plate.

14.2 VP1340

Detailed technical specifications for the VP1340 model vibratory plate.

14.3 VP1550

Detailed technical specifications for the VP1550 model vibratory plate.

14.4 VP2050

Detailed technical specifications for the VP2050 model vibratory plate.

14.5 Combustion engine

4 Security

4.1 Policy

4.2 Areas of responsibility of the operator

4.3 Operator responsibilities

4.4 Personnel qualification

4.6 General safety instructions

General safety guidelines for working area, operation, personal safety, and handling.

4.7 Specific safety instructions - Vibratory plates

Safety precautions related to external environmental factors affecting vibratory plate operation.

4.7.2 Operational safety

Guidelines for safe operation, preventing damage to lines and ensuring operator attention.

4.8 General safety instructions - Combustion engines

4.9 General safety instructions - fuel, lubricants and coolants

4.10 Maintenance

Safety instructions and general notes regarding machine maintenance procedures.

4.11 Personal Protective Equipment

Mandatory personal protective equipment required for safe operation and maintenance.

4.12 Safety devices

Explanation of safety features and barriers designed to protect the user.

4.13 Behavior in dangerous situations

6 Setup and function

7 Components and operators controls

7.2 Operators controls

9 Operation and use

9.1 Initial operation

9.2 Before commissioning

9.3 Notes about operation

9.4 Commissioning

9.5 Operation

9.6 Decommissioning

10 Maintenance

10.1 Maintenance table

A table outlining daily, weekly, and monthly maintenance tasks and intervals.

10.2 Maintenance jobs

11 Troubleshooting

11.1 Fault table

A table listing common faults, their possible causes, and recommended remedial measures.

Wacker Neuson VP1340 Specifications

General IconGeneral
BrandWacker Neuson
ModelVP1340
CategoryPower Tool
LanguageEnglish

Related product manuals