What to do if Wacker Neuson Power Hammer engine stops shortly after starting?
If your Wacker Neuson Power Hammer engine stops shortly after starting, it could be due to a few reasons: * The fuel tank might be empty, so refill it. * The fuel filter might be clogged and needs to be changed. * The air filter could be dirty; try cleaning or replacing it.
General| Brand | Wacker Neuson |
|---|---|
| Model | BH23 |
| Category | Power Tool |
| Language | English |
Outlines the general safety principles and proper use of the machine.
Specifies requirements for personnel operating the machine, including training and physical fitness.
Details essential personal protective equipment (PPE) required for safe operation.
Lists safety measures for operating the machine in various environments and conditions.
Provides specific safety guidelines for operating handheld machines.
Covers safety aspects related to the gasoline engine, including refueling and hazards.
Explains the function of safety devices like the burn protector and warnings related to them.
Lists essential checks to perform before starting the machine.
Details the procedure for safely changing the tool on the machine.
Provides operational tips and notes for starting the machine, especially in cold conditions.
Step-by-step guide on how to start the gasoline engine of the machine.
Instructions on how to operate the machine for processing materials and breaking edges.
To Next Page