INTRODUCTION
This manual contains information and warnings which must be followed
to ensure safe operation and retain the meter in safe condition.
1
The following safety precautions must be observed to ensure maximum
personal safety during the operation, service and repair of this meter:
SAFETY PRECAUTIONS:
If any of the above items are missing or are received in a damaged condition,
please contact the distributor from whom you purchased the unit.
Upon removing your new Digital Clamp Meter (DCM) from its packing, you
should have the following items:
1. Digital Clamp Meter
2. Test Lead Set (one black, one red)
3. 9-Volt Battery (installed in meter)
4. Type-K thermocouple
5. Instruction Manual
UNPACKING AND INSPECTION
This clamp meter is a handheld 6600-count instrument that is designed
for use in the laboratory, field servicing, at home, and any circumstance
where high current measurement is required.The clamp meter is built with
a design of finger guard which ensures users operating the instrument
under a safety situation; a rugged case that is shock resistant and fire-
retardant; and electronic overload protection for all functions and ranges.
In addition, a carrying case (optional accessory) is available for easy
portability of the meter and avoiding damage.
WARNING
READ "SAFETY INFORMATION" BEFORE USING THE METER.
2609C.p65 ?2009/12/15, 上午 09:153
To Next Page
Loading...
