112
Index
Contents
112
Index
Contents
INSTALLING MULTIPLE TABLETS
Any tablet that has been detected on your system will appear as an icon within the Wacom Tablet control
panel T
ABLET list.
To add a new tablet
, connect it to your computer. The system will automatically find the tablet and initialize
it. An icon for the tablet will then appear in the control panel.
Important: When installing additional tablets on Windows systems, the eraser function may not
work in some applications when using the additional tablet(s). The eraser function will continue to
work correctly using the first tablet that was added to the control panel.
To remove one of multiple tablets from the driver
, select the tablet to be removed and click on the [ – ]
button next to the T
ABLET list.
• A tablet must be attached to the computer before it can be deleted from the control panel list.
• You will need to restart your computer before you can again add the tablet to the driver.
Select a tablet icon for which to customize tool
and application settings.
• The control panel will not launch unless a
supported tablet is connected to the
computer.
• Settings can only be viewed or changed for
an attached tablet.
To Next Page
Loading...
Need help?
General
