Need help?Do you have a question about the Waeco AirCon Service Center and is the answer not in the manual?
General| Brand | Waeco |
|---|---|
| Model | AirCon Service Center |
| Category | Service Equipment |
| Language | English |
Contact information for further assistance with the AirCon Service Center.
Details the meaning of various symbols and formatting used in the manual.
Provides essential safety guidelines for operating the AirCon Service Center.
Instructions for the safe operation of the AirCon Service Center.
Guidelines and precautions for handling refrigerants safely.
Operational measures and training requirements for using the unit.
Key warnings and precautions related to the AirCon Service Center.
Description of the built-in safety mechanisms of the AirCon Service Center.
Identifies and describes the components on the front of the AirCon Service Center.
Identifies and describes the components on the rear of the AirCon Service Center.
Step-by-step guide for setting up and powering on the AirCon Service Center.
Explains the information displayed in the standby menu.
Procedure for selecting the operating language of the AirCon Service Center.
Instructions for entering company-specific data for service logs.
Procedure for setting the date and time for the AirCon Service Center.
How to adjust preset default parameters for service tasks.
Guide to installing oil and UV additive containers.
How to input container sizes for oil and UV additive.
Instructions for filling the internal refrigerant vessel.
Procedure for safely shutting down the unit in various situations.
Overview of the fully automatic air conditioning service process.
Information on protecting the unit with personal user codes.
Step-by-step guide to creating user codes for access control.
How to enter a user code to enable the station.
Guide to creating a database of customer-specific vehicles.
How to save and transfer operational data to a USB stick.
Instructions for transferring annual data after a year change.
Procedure for manually transferring monthly or annual reports.
How to view refrigerant consumption data on the unit's display.
Procedure for testing the A/C system without refrigerant recovery.
Step-by-step A/C servicing with optional procedures and data entry.
Detailed steps for the refrigerant extraction and recycling phase.
Procedure for evacuating the system, including leak testing.
Steps for filling with fresh oil, UV additive, and refrigerant.
How to select connections based on the vehicle's A/C system.
Final steps after completing A/C service, including hose disconnection.
Guide to flushing the A/C system with fresh refrigerant.
Procedure for performing annual leak detection on the AirCon Service Center.
Steps to calibrate oil and UV additive scales for accurate measurement.
Instructions for replacing the dryer filter, including O-ring replacement.
Procedures for filter maintenance and resetting service messages.
Guide to calibrating the pressure transducer for accurate readings.
Detailed steps for changing the vacuum pump oil.
How to access and interpret various meter readings from the unit.
Adjusting filling quantities based on service hose length.
Instructions for replacing the printer paper roll.
Procedure for updating the unit's software and database via USB.
Procedure for manually discharging non-condensing gases.
Guidelines for the proper disposal of used fluids.
Instructions for disposing of cardboard and plastic packaging.
Procedures for disposing of the old AirCon Service Center unit.
Diagram illustrating the operational flow of the AirCon Service Center.
List of components and their descriptions used in the technical diagrams.
Schematic diagram of the electrical components and connections.
To Next Page
