EasyManua.ls Logo

Waeco VAS 6381B User Manual

Waeco VAS 6381B
68 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
AirConServiceCenter
VAS 6380B / VAS 6381B
Air conditioning service unit
Operating manual
WaecoVAS6380B-6381B_OPM_4445101232_AMER(us)_202x-xx-xx.book Seite 1 Montag, 2. November 2020 4:18 16

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Waeco VAS 6381B and is the answer not in the manual?

Waeco VAS 6381B Specifications

General IconGeneral
BrandWaeco
ModelVAS 6381B
CategoryService Equipment
LanguageEnglish

Summary

Safety Guidelines

General Safety Instructions

Covers observance of regulations, specialist training, authorized repair, and intended use of the unit.

Operating the Device Safely

Provides warnings about unintended switching on and procedures for safe maintenance.

Handling Refrigerant Safely

Emphasizes protection against freezing, vapor inhalation, and proper ventilation.

Safety Devices

Describes the function of safety devices like pressure monitor and pressure relief valves.

Scope of Delivery

Intended Use and Qualifications

AirCon Service Center Overview

Front Panel Components

Identifies and labels all components on the front of the AirCon Service Center.

Rear Panel Components

Identifies and labels components located on the rear of the AirCon Service Center.

Initial Setup and Startup

Setting Up and Powering On

Details the steps for positioning the unit, connecting power, and initial boot-up sequence.

Installing Oil and UV Additive Containers

Instructs on how to insert the oil and UV additive containers into the unit.

Filling the Internal Refrigerant Container

Guides on the procedure for filling the unit's internal refrigerant vessel from an external source.

Unit Operation

Shutdown and Emergency Procedures

Details the procedures for safely shutting down the unit during maintenance, emergencies, or malfunctions.

Automated Short Service Selection

Explains the automated air conditioning service sequence initiated by the 'Short selection' menu.

Refrigerant Extraction Process

Guides through selecting settings and performing the refrigerant extraction and recycling phase.

Vacuum and Leak Test Process

Details how to select settings and perform the vacuum phase, including leak testing.

Filling Process (Oil, UV, Refrigerant)

Instructs on selecting values and performing the filling phase with oil, UV additive, and refrigerant.

Flushing the Air Conditioning System

Maintenance and Service Tasks

Troubleshooting Guide

Related product manuals