What does Error G1 on Waeco ASC 6300 G LE Service Equipment mean and how to fix it?
Error G1 means that a connection to the analysis module could not be made. Check the connections and see if the LEDs on the module are activated.
What should I do if my Waeco ASC 6300 G LE Service Equipment displays 'Not enough vacuum! Carry on?'?
This message appears during the vacuum process if the pressure in the air conditioning system after 8 min is still more than 50 mbar. Check the air conditioning system or the connections between it and the A/C service unit for leaks.
What does it mean when my Waeco ASC 6300 G LE displays 'A/C system leakage! Carry on?'?
This message appears at the end of the vacuum process. It means the air conditioning system shows a vacuum loss of more than 120 mbar during the checking time. Check the air conditioning system or the connections between it and the A/C service unit for leaks.
How to fix Error 52 on Waeco ASC 6300 G LE?
Error 52 means that no USB flash drive was found or recognised. Insert the USB flash drive and ensure that it has been formatted with the FAT32 file system.
What could cause Error 00001 on Waeco ASC 6300 G LE Service Equipment?
Error 00001 indicates that the readings are unstable. Keep possible electrical sources of interference, such as mobile phones or welding equipment, away from the device.
What to do if Waeco ASC 6300 G LE Service Equipment displays Error 00001?
Error 00001 indicates that the refrigerant sample has a very high content of air or the amount of refrigerant was too low for testing. Ensure that there is enough refrigerant pressure and that all the hoses are connected, not kinked, and free of oil.
What does Error 03 mean on Waeco ASC 6300 G LE and how to fix it?
Error 03 means that no data is coming from the refrigerant scale. Check the scale.
How to solve Error 04 on Waeco ASC 6300 G LE Service Equipment?
Error 04 indicates that it is not possible to lower the pressure when flushing takes place. Check the air conditioner and connections for leaks, constrictions, and ice build-up. Also, check the pressure transducer calibration.
What to check if Waeco ASC 6300 G LE Service Equipment shows 'External tank empty or closed valve. Check!'?
This message appears at the start or during the filling of the internal refrigerant container if the set refrigerant quantity cannot be attained. Check if the external refrigerant container still contains enough refrigerant or if the valves of the external refrigerant container are open.
What does it mean when my Waeco ASC 6300 G LE displays 'Not enough oil. Add!'?
This message appears during the filling process if there is not enough fresh oil in the container to finish the process. Top up the fresh oil container with a suitable oil type.
Introduces the manual, lists languages, and highlights safety guidelines.
Specifies unit applications, optional items, and contact information.
Describes unit features, identifies parts, and explains safety mechanisms.
Guides through powering on, selecting refrigerant, language, and configuring basic settings.
Covers operation, shutdown, testing, and user access control.
Explains automated, manual, and flushing service modes.
Covers filter replacement, calibration, updates, and data export.
Guidance for diagnosing and resolving problems, errors, and warnings.
Procedures for disposal and detailed technical data for both unit models.
Flowcharts and electrical schematics illustrating unit operation.
General| Brand | Waeco |
|---|---|
| Model | ASC 6300 G LE |
| Category | Service Equipment |
| Language | English |
To Next Page