To Next PageTo Next PageWhat to do when Waeco ASC 6300 G LE displays 'Change the vacuum pump oil! Go on?'?
This message appears when you switch on the A/C service unit. Change the vacuum pump oil as soon as possible. To skip this, press ENTER for 3 seconds.
What to do when Waeco Service Equipment displays 'Change the equipment drier filter! Go on?'?
This message appears when you switch on the A/C service unit. Change the internal filter as soon as possible. To skip this, press ENTER for 3 seconds.
What to do if Waeco Service Equipment displays 'Warning! Internal vessel overpressure!'?
This message may appear during the recycling process. To continue, press ENTER for three seconds. If the message appears repeatedly, contact customer services.
How to resolve 'Max. filling time exceeded! Carry on?' message on Waeco ASC 6300 G LE?
This message appears during the filling process if the set amount of refrigerant cannot be filled. Check that the A/C service unit's connections are not blocked.
What does it mean when my Waeco ASC 6300 G LE displays 'Not enough oil. Add!'?
This message appears during the filling process if there is not enough fresh oil in the container to finish the process. Top up the fresh oil container with a suitable oil type.
What to do if Waeco ASC 6300 G LE displays 'Not enough UV. Add!'?
This message appears during the filling process if there is not enough UV additive in the container to finish the process. Fill the UV additive container.
What does it mean when my Waeco ASC 6300 G LE Service Equipment display shows 'Drained oil glass emptying!'?
This message appears during the extraction or recycling process if there is more than 150 ml of used oil in the container. Dispose of the content of the used oil container in an environmentally responsible manner.
Why does my Waeco ASC 6300 G LE Service Equipment display 'Warning! Pressure inside the A/C system!'?
This message appears during the vacuum process and indicates there is pressure in the air conditioning system. No action is required; the process continues automatically.
Why does my Waeco ASC 6300 G LE display 'Warning! Pressure inside the A/C system. Recovery start!'?
This is a normal message that appears at the start of the vacuum process, indicating there is still pressure present in the air conditioning system. No action is required; the process continues automatically.
What to do if Waeco ASC 6300 G LE displays 'Warning! Internal vessel filled.'?
This warning indicates that the internal refrigerant container is too full to hold the quantity to be extracted. You should drain the internal refrigerant container in the proper manner.
General| Brand | Waeco |
|---|---|
| Model | ASC 6300 G LE |
| Category | Service Equipment |
| Language | English |
Introduces the manual, lists languages, and highlights safety guidelines.
Specifies unit applications, optional items, and contact information.
Describes unit features, identifies parts, and explains safety mechanisms.
Guides through powering on, selecting refrigerant, language, and configuring basic settings.
Covers operation, shutdown, testing, and user access control.
Explains automated, manual, and flushing service modes.
Covers filter replacement, calibration, updates, and data export.
Guidance for diagnosing and resolving problems, errors, and warnings.
Procedures for disposal and detailed technical data for both unit models.
Flowcharts and electrical schematics illustrating unit operation.
