To Next PageTo Next PageWhat does 'Error 09' mean on Waeco Service Equipment?
If the Waeco Service Equipment displays 'Error 09', it means the low pressure connector was not connected to the flush container during flushing. Connect the low pressure hose to the flush box and open the valve.
What to do if Waeco Service Equipment displays 'A/C system leakage! Carry on?'?
If the Waeco Service Equipment displays 'A/C system leakage! Carry on?', it means that at the end of the vacuum process, the air conditioning system shows a vacuum loss of more than 120 mbar during the checking time. Check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
What to do if Waeco AirCon Service Center VAS 581 001A Service Equipment displays 'External tank empty or closed valve. Check!'?
If the Waeco Service Equipment displays 'External tank empty or closed valve. Check!', it means that at the start or during the filling of the internal refrigerant container, the set refrigerant quantity cannot be attained. Check if the external refrigerant container still contains enough refrigerant or if the valves of the external refrigerant container are open.
Why does my Waeco AirCon Service Center VAS 581 001A display 'Not enough oil. Add!'?
The 'Not enough oil. Add!' message appears during the filling process if there is not enough fresh oil in the container to finish the process. Top up the fresh oil container with a suitable oil type.
What does 'Error 12' mean on Waeco AirCon Service Center VAS 581 001A Service Equipment?
If the Waeco Service Equipment displays 'Error 12', it means that it was not possible to remove any refrigerant from the internal vessel during the “Software test”. Check pressure transducer calibration. Check if the valve on the internal vessel is open. Check the RE valve.
What does 'Error 22' mean on Waeco AirCon Service Center VAS 581 001A?
If the Waeco Service Equipment displays 'Error 22', it means that the low pressure hose is leaking or connected to an empty air conditioning unit and vacuum could not be reached. Disconnect service hose from the unit.
What does 'Error 40' mean on Waeco AirCon Service Center VAS 581 001A Service Equipment?
If the Waeco Service Equipment displays 'Error 40', it indicates a pressure drop during the pressure test. Check the air conditioning system and connections for leaks.
What does 'Error 41' mean on Waeco AirCon Service Center VAS 581 001A Service Equipment?
If the Waeco Service Equipment displays 'Error 41', it indicates a pressure drop during the pressure test. Check air conditioning system and connections for leaks.
What does 'Drained oil glas emptying!' mean on my Waeco AirCon Service Center VAS 581 001A?
The message 'Drained oil glas emptying!' appears during the extraction or recycling process if there is more than 150 ml of used oil in the container. Dispose of the content of the used oil container in an environmentally responsible manner.
Why does my Waeco Service Equipment display 'Change the vacuum pump oil! Go on?'?
The message 'Change the vacuum pump oil! Go on?' appears when you switch on the AirConServiceCenter. Change the vacuum pump oil as soon as possible. To skip this, press ENTER for 3 seconds.
General| Brand | Waeco |
|---|---|
| Model | AirCon Service Center VAS 581 001A |
| Category | Service Equipment |
| Language | English |
Essential safety precautions and warnings for operating the unit.
Guidelines for safe operation, handling potential hazards, and device placement.
Procedures and precautions for safe handling of refrigerants, including PPE.
Operator responsibilities for training personnel and ensuring safe operational practices.
Specific warnings and connection requirements for the AirCon Service Center.
Details on the built-in safety mechanisms of the AirCon Service Center.
Steps for performing the automated internal leak test.
Instructions for connecting the unit to power and initial power-on.
Correct procedure for installing oil and UV additive containers.
Process of analyzing refrigerant purity, handling passed or failed results.
Procedure for filling the unit's internal refrigerant reservoir.
Steps for safely shutting down the unit during emergencies or malfunctions.
Performing a fully automatic AC service using a simplified menu.
Performing service tasks step-by-step with manual control over procedures.
