To Next PageTo Next PageWhat does 'Drained oil glas emptying!' mean on my Waeco AirCon Service Center VAS 581 001A?
The message 'Drained oil glas emptying!' appears during the extraction or recycling process if there is more than 150 ml of used oil in the container. Dispose of the content of the used oil container in an environmentally responsible manner.
What to do if Waeco AirCon Service Center VAS 581 001A Service Equipment displays 'Not enough vacuum for injection!'?
If the Waeco Service Equipment displays 'Not enough vacuum for injection!', it means that during the filling phase, the vacuum in the air conditioning system is insufficient to end the process. Check the air conditioning system or the connections between it and the AirConServiceCenter for leaks.
Why does my Waeco Service Equipment display 'Change the vacuum pump oil! Go on?'?
The message 'Change the vacuum pump oil! Go on?' appears when you switch on the AirConServiceCenter. Change the vacuum pump oil as soon as possible. To skip this, press ENTER for 3 seconds.
Why does my Waeco AirCon Service Center VAS 581 001A Service Equipment display 'Max. filling time exceeded! Carry on?'?
The message 'Max. filling time exceeded! Carry on?' appears during the filling process if the set amount of refrigerant cannot be filled. Check that AirConServiceCenter connections are not blocked.
Why does my Waeco AirCon Service Center VAS 581 001A display 'Change the equipment drier filter! Go on?'?
The message 'Change the equipment drier filter! Go on?' appears when you switch on the AirConServiceCenter. Change the internal filter as soon as possible. To skip this, press ENTER for 3 seconds.
What does 'Warning! Internal vessel full!' mean on my Waeco AirCon Service Center VAS 581 001A Service Equipment?
The message 'Warning! Internal vessel full!' means that the internal refrigerant container is too full to hold the quantity to be extracted. Drain the internal refrigerant container in the proper manner.
Why does Waeco AirCon Service Center VAS 581 001A Service Equipment say 'Quantity too large. Fill internal vessel!'?
The message 'Quantity too large. Fill internal vessel!' appears during the process input if there is not enough refrigerant in the internal container to complete the process. Fill the refrigerant container.
What does 'Not enough UV. Add!' mean on my Waeco AirCon Service Center VAS 581 001A?
The 'Not enough UV. Add!' message appears during the filling process if there is not enough UV additive in the container to finish the process. Fill the UV additive container.
Why does my Waeco AirCon Service Center VAS 581 001A display 'Not enough oil. Add!'?
The 'Not enough oil. Add!' message appears during the filling process if there is not enough fresh oil in the container to finish the process. Top up the fresh oil container with a suitable oil type.
What to do if Waeco AirCon Service Center VAS 581 001A Service Equipment displays 'External tank empty or closed valve. Check!'?
If the Waeco Service Equipment displays 'External tank empty or closed valve. Check!', it means that at the start or during the filling of the internal refrigerant container, the set refrigerant quantity cannot be attained. Check if the external refrigerant container still contains enough refrigerant or if the valves of the external refrigerant container are open.
General| Brand | Waeco |
|---|---|
| Model | AirCon Service Center VAS 581 001A |
| Category | Service Equipment |
| Language | English |
Essential safety precautions and warnings for operating the unit.
Guidelines for safe operation, handling potential hazards, and device placement.
Procedures and precautions for safe handling of refrigerants, including PPE.
Operator responsibilities for training personnel and ensuring safe operational practices.
Specific warnings and connection requirements for the AirCon Service Center.
Details on the built-in safety mechanisms of the AirCon Service Center.
Steps for performing the automated internal leak test.
Instructions for connecting the unit to power and initial power-on.
Correct procedure for installing oil and UV additive containers.
Process of analyzing refrigerant purity, handling passed or failed results.
Procedure for filling the unit's internal refrigerant reservoir.
Steps for safely shutting down the unit during emergencies or malfunctions.
Performing a fully automatic AC service using a simplified menu.
Performing service tasks step-by-step with manual control over procedures.
