To Next PageTo Next Page
Need help?Do you have a question about the Waeco CoolAir SP 950T and is the answer not in the manual?
Defines symbols used for warnings, cautions, notices, and supplementary information in the manual.
Guidelines for the safe use of the air conditioning roof unit, including restrictions and proper operation.
Instructions for safely laying and connecting electrical cables to prevent damage or hazards.
Details about the manual's purpose, scope, and intended audience of qualified installation personnel.
Important preliminary instructions and tips to observe before and during the installation process.
Identifies and lists the various components of the CoolAir SP950T unit by their figure number and designation.
Comprehensive guide detailing the step-by-step process for installing the CoolAir SP950T unit, from preparation to final assembly.
Procedure for entering and exiting the unit's software configuration mode for parameter adjustment.
Configures the desired room temperature for the unit's automatic start-up.
Sets the voltage threshold for battery protection, preventing excessive discharge.
Selects the default operating mode the unit will use upon startup.
Resets configuration parameters for menu levels 1-3 back to their factory default values.
Configures whether the room temperature is displayed in Celsius (°C) or Fahrenheit (°F).
General