4.0A Intelligent Battery Charger by Wagan Tech
®
7
www.wagan.com
LiFePO4
V
12V
12V LiFePO
4
mode: 14.4V/4.0A
This mode is normally used for the
LiFePO
4
batteries >14Ah
V
6V
Mo de 7.5V/4.0A
This mode is normally used for all types
of 6V lead acid batteries > 14 Ah
FULL
Charging status indicator
This column will show charging status.
When the battery is fully charged, the
word “FULL” will show up.
FAULT CODES
F1 1. No clamps connected.
2. Short circuit
3. Reverse polarity connection
F2 Loose clamps during charging
F3 Battery voltage is too high.
F4 Bad battery.
MEMORY FUNCTION
This charger has Memory Function. It will return to last mode you chose next time
the charger is connected.
To Next Page
Loading...
