FURNO 700 · FURNO 750
12
EN
Accessories
The following accessories may come with the Heat Gun or may be purchased separately by visiting www.wagner-group.com/service.
Alternatively see back of manual for your nearest Service Centre.
Name Description Name Description
Concentrator
Nozzle
P/N2366222
Directs a concentrated heat
ow to the work surface. Ideal
for removing paint in awkward
corners, crevices, mouldings,
beading or architraves.
Glass Protection
Nozzle
P/N2366224
Deects the heat away from
glass or other fragile areas. Ideal
for window sills, ledges, frames
and skirting boards.
Wide Concentrator
Nozzle
P/N2366223
Directs a long, narrow heat pattern
to the work surface. Ideal for
removing paint or varnish from
large, at surfaces such as skirting
boards, doors, stairs, etc. It should
be used in conjunction with a at
scraper.
Reector Nozzle
P/N2366225
Disperses the heat ow evenly
around the whole work surface.
Ideal for thawing frozen pipes,
solder pipe work, bending
plastics or heat shrinking
electrical insulating tubing.
Name Description
5-in-1 Detailed
Scraper Tool
P/N2366227
1+2
4
3
5
This tool has 5 functions. The blade is used to (1) scrape paint and (2) spread
compound. The gouge point (3) is used to remove putty/caulk from open
cracks. The curved area (4) is used to clean roller covers. The at side (5) can be
used to open paint tins.
Carry Case
P/N2366226
The heat gun carry case with AngleLoc has been specically designed to
locate the heat gun in the upright position for work on uneven surfaces.
To Next Page
Loading...
Need help?
General
