To Next PageTo Next Page
Need help?Do you have a question about the WAGNER Paint Eater and is the answer not in the manual?
General| Brand | WAGNER |
|---|---|
| Model | Paint Eater |
| Category | Power Tool |
| Language | English |
Read all instructions and product labels carefully before using electrical tools to reduce risks.
Call toll-free or visit the website for assistance with any comments or problems with the Wagner Product.
Keep work area clean, well-lit, and away from explosive atmospheres. Keep bystanders clear.
Ensure proper grounding, avoid body contact with grounded surfaces, protect cords from damage, and use outdoor rated cords.
Stay alert, dress properly, avoid accidental starting, maintain footing, use safety equipment, and check accessories.
Secure workpiece, use correct tool, ensure switch works, disconnect power before adjustments, store safely, maintain tools, use recommended accessories.
Tool service requires qualified personnel using identical replacement parts to avoid injury risks.
Warnings about dust from sanding/sawing containing cancer-causing chemicals; use NIOSH/OSHA approved respirators.
Ensure the product is plugged into a properly installed and grounded outlet to prevent electric shock.
Use appropriate gauge extension cords for the product's current draw and length to prevent voltage drop and overheating.
Always wear eye/respiratory protection, test for lead paint, and avoid home siding with asbestos.
Wear approved respirators, no eating/drinking/smoking in work area to prevent ingesting paint particles.
Minimize dust generation, reduce tracking, vacuum thoroughly, and dispose of debris safely.
Wear safety glasses, use dust capture, direct particles away, remove flammables, use undamaged discs.
Surface preparation tool for wood, siding; removes paint chips, oxides, mildew; abrades surfaces.
Lists electrical specifications (Amps, Volts, RPM) and identifies key parts like switch, handle, and disc.
Graphics showing different hand placement options for right- or left-handed use of the tool.
Guides on plugging in, positioning hands, turning on, and applying the disc to the surface.
Advice on testing the tool, holding the disc flat or on edge, and cleaning the disc during use.
Instructions for safely removing and installing new discs using the disc lock mechanism.
Inspect tool condition before use, clean body with mild detergent, avoid solvents or immersion.
Encourages filling out and returning the registration card for proof of purchase and service.
Outlines the one-year limited warranty for defects, excluding unauthorized service and accessories.
