English
6
General Description
The Paint Eater™ is an excellent surface preparation tool when preparing solid wood,
wood siding and masonite siding for paint.
Do not use Paint Eater™ on textured
siding or shakes.
The Paint Eater™ has been designed to perform a number of tasks associated with
surface preparation. It will remove paint chips and feather the paint edges; it can be
used to remove paint oxides and mildew; and will abrade the painting surface and
provide for excellent paint adhesion. The Paint Eater™ is the perfect surface preparation
tool for large, flat, solid surfaces.
CAUTION - This tool is intended for outdoor use only on solid wood or masonite
surfaces. If the surface you want to prepare for paint is rotted or damaged, it
should be replaced.
Parts and Components
Strap
ON / OFF switch
(O = off / l = on)
Folding handle
Handle lock button
Squeeze buttons on both sides of handle
base to unlock. Handle will lock into place
when fully vertical or horizontal.
Disc lock
Disc*
*Replacement discs: P/N 0513041
(not to be used with anything other than the Paint Eater™)
Hand Positions
See the graphics below for the different options for hand placement when using the Paint
Eater™. The Paint Eater™ can be used whether you are right- or left-handed.
Specifications
Amps . . . . . . . . . . . .3.2
Volts . . .120VAC, 60Hz
RPM . . . . . . . . . . .2600
Disc size . . . .4.5 inches
To Next Page
Loading...
