FURNO 700 · FURNO 750
3
EN
GENERAL SAFETY INSTRUCTIONS
WARNING! Read all safety information, instructions,
illustrations and technical data provided with
this power tool. Failure to observe the following
instructions may cause electric shock, re and/or
severe injuries. Keep all safety information and
instructions for future reference. The term “power
tool” used in this safety information refers to mains-
operated power tools (with power cable) and to
battery-powered power tools (without power cable).
This Heat Gun produces extremely high temperatures (as high
as 630°C). It must be used with caution to prevent combustible
material from igniting.
• Take particular care when working near ammable materials.
Remove ammable materials where possible from the work
area.
• Always keep a bucket of water or re extinguisher nearby for
safety purposes.
• Keep the Heat Gun in constant motion. Do not stop or dwell
in one spot.
• Do not block the ventilation openings and when working
maintain a distance of at least 5 cm between the nozzle and
the surface so as not to overheat the device. An overheated
device cannot be repaired.
• Do not use the device in at atmosphere at risk of explosion.
• Be aware that heat may be transferred to ammable
materials that are outside your eld of vision.
• Always set the device down on its pedestal and allow it to
cool down completely before storing it.
• Never touch the nozzle while it is still hot.
• Do not leave the device unsupervised while it is switched
on.
• This device may be used by children aged 8 years and over,
as well as by persons with impaired physical, sensory or
mental capacities or a lack of experience and knowledge if
they are supervised or have been instructed in the safe use
of the device and understand the dangers arising from it.
Children must not play with the device. Cleaning and user
maintenance must not be carried out by children without
supervision.
• The heat gun and paint become very hot. Wear safety gloves
and safety goggles while working to avoid burns.
• Do not direct the hot air ow towards people or animals.
• Do not use the Heat Gun as a hair dryer.
ATTENTION! When paint is heated, harmful gases
and vapours may develop. Always wear suitable
respiratory protection and ensure adequate
ventilation of the work space.
• Old layers of paint may contain lead. Paint containing lead
must not be removed with a heat gun. If in doubt, have the
paint checked by an expert.
• Before every use, check the electrical tool, cable and plug. Do
not use the electrical tool if it is damaged. Do not open the
electrical tool yourself and only have it repaired by qualied
specialist personnel using original spare parts.
To Next Page
Loading...
Need help?
General
