To Next PageTo Next PageWhy is my WAGNER Earlex 5700 leaking material?
Material leaking from your WAGNER Paint Sprayer could be due to a loose nozzle, so tighten it. If the nozzle is worn, replace it. Material build-up on the air cap and nozzle can also cause leaks, so clean them.
Why does my WAGNER Paint Sprayer nozzle spit?
If your WAGNER Paint Sprayer nozzle spits, it could be because the material in the container is running out; refill it. Alternatively, the air filter might be clogged; change it.
Why is the spray pattern light and splotchy with my WAGNER Earlex 5700?
A light and splotchy pattern from your WAGNER Paint Sprayer can be caused by moving the spray gun too fast; adjust material flow or decrease movement of spray gun. It could also be due to the material flow setting being too low; increase the material flow setting.
Why is there little or no material flow from my WAGNER Earlex 5700 Paint Sprayer?
If your WAGNER Paint Sprayer has little to no material flow, it could be due to several reasons. The nozzle or suction tube might be clogged, so try cleaning them. The material flow setting could be too low, so increase it. Ensure there's pressure build-up in the container by tightening the container or lid and checking the clear tube. A clogged air filter can also cause this, so change it. Finally, the spray material might be too thick, so thin it out.
How to reduce overspray with a WAGNER Earlex 5700?
Too much overspray from your WAGNER Paint Sprayer can occur if the gun is too far from the spray object; reduce the distance to 6-8 inches. Additionally, the material flow setting may be too high; decrease the material flow.
What to do if WAGNER Paint Sprayer spray pattern is too thick?
If the spray pattern from your WAGNER Paint Sprayer is too thick, causing runs and sags, it might be because the material flow setting is too high; decrease it. Also, you might be applying too much material, so adjust the material flow or increase the movement of the spray gun.
General| Brand | WAGNER |
|---|---|
| Model | Earlex 5700 |
| Category | Paint Sprayer |
| Language | English |
Explains the meaning of safety symbols used throughout the manual.
Details the care and servicing requirements for double-insulated products.
Provides crucial guidelines for safe electrical operation and extension cord usage.
Details risks of flammable vapors igniting and prevention methods.
Outlines dangers of electric shock and necessary precautions.
Covers general product risks, personal protective equipment, and safe practices.
Identifies and labels the various parts of the spray gun and turbine unit.
Discusses paint viscosity and selection of fluid tips and needles for optimal spraying.
Explains the function and location of the turbine's power switch.
Details how to adjust the amount of material sprayed from the nozzle.
Explains the function of the spray gun trigger for material delivery.
Describes how to adjust the air cap for horizontal, vertical, or round spray patterns.
Guidance on choosing appropriate paints and coatings for the sprayer.
Covers cleaning surfaces and masking areas before spraying.
Instructions on checking and adjusting paint viscosity using the viscosity cup.
Steps for filling the material container and positioning the pickup tube correctly.
Instructions for securing the paint container and connecting the air hose to the turbine.
Detailed explanation of material flow settings for different spraying needs.
Guidance on adjusting the air cap for various spray pattern shapes.
Guidance on masking the room and preparing the spray area.
Technique for applying material with consistent passes and overlap.
Instructions for rinsing the material container and flushing the spray gun.
Step-by-step guide for disassembling and cleaning the spray gun components.
Procedure for inspecting and replacing the air filters in the turbine.
Instructions for disassembling and replacing the spray needle and related parts.
Lists common issues like no material flow, leaks, overspray, and their resolutions.
Information on ordering different fluid tip and needle sets and material containers.
Diagram and list of numbered parts for the spray gun and turbine assembly.
Detailed list of all components with part numbers in English, French, and Spanish.
Details the two-year limited warranty for home usage and exclusions.
