Need help?Do you have a question about the WAGNER PP90 SKID HEA EXTRA and is the answer not in the manual?
General| Brand | WAGNER |
|---|---|
| Model | PP90 SKID HEA EXTRA |
| Category | Paint Sprayer |
| Language | English |
Airless units develop high pressures. Be aware of injection risks.
Observe critical points before operating the device for safe use.
Follow specific rules for safety during breaks or work stoppages.
Understand various symbols indicating danger, tips, and required protective equipment.
Maintain a clean, well-lit workplace and keep others away.
Ensure proper grounding, avoid water, and use correct extension cords.
Stay attentive, wear PPE, avoid accidental starts, and maintain posture.
Do not overload, check for defects, remove plugs, and store properly.
Ensure tools are properly maintained by specialists using original parts.
Avoid ignition sources and be aware of electrostatic charging risks.
Ensure good ventilation and secure hoses properly.
Manage spray gun recoil and observe maximum operating pressure.
Caution with substances and high-pressure hose integrity.
Use a properly earthed socket outlet with residual current protection.
Ensure proper ventilation and distance from sprayed objects.
Clean units promptly; understand thermal release for overheating.
Use appropriate coating materials; avoid abrasive or unsuitable substances.
Mask areas, cover surfaces, and use suitable adhesive tape.
Stir and dilute materials as recommended for optimal spraying.
Connect hoses, gauge, and spray gun securely.
Understand ON/OFF switch, selector switch (PRIME/SPRAY), and pressure regulator.
Lock trigger when not in use; select correct nozzle and filter.
Follow steps for priming, flushing, and initial operation.
Maintain consistent speed, distance, and angle for even coating.
Procedures for unclogging the nozzle and interrupting work safely.
Clean the device promptly after use with water or cleaning solution.
Disassemble, clean, and reassemble the spray gun parts.
Clean or service the inlet valve if paint is not being sucked up.
Follow procedures for servicing the pump, including wearing eye protection.
List of available spare parts for the device.
List of optional accessories not included in delivery.
List of further optional accessories for enhanced functionality.
Specifications including power, pressure, delivery rate, and weight.
Troubleshoot issues where the sprayer fails to start.
Address issues with paint suction or pressure drops during operation.
Resolve problems with gun leaks, nozzle assembly, or no spray.
Details on scope, period, registration, and handling of guarantee claims.
Conditions and parts not covered by the guarantee.
Information on regulations, liability, and German law.
Instructions for replacing the mains lead and plug safety.
EU Declaration of Conformity statement for the product.
To Next Page